Find answers, ask questions, and connect with others in our UK cycling & mountain bike forum.

  • Bottom Bracket Advice

     Magnus updated 3 years, 9 months ago 2 Members · 4 Posts
    This page may contain affiliate links which means that Cycling Addicts earns from qualifying purchases. See our full disclosure.
  • Tucky

    Member
    24 October 2016 at 7:11 pm

    The bottom bracket on my Wifes Canyon Yellowtone was making a loud clicking on each pedal rotation so I decided to remove and potentially replace it. I have taken it off the bike but cannot find a direct replacement. The markings show it as a BB-ES25 which seems a fairly standard model, but this one has an extra bit sticking out from the drive side spline. I have attached some photos showing what I mean. Can anyone advise where I can get a replacement or maybe I have managed to knacker something up when removing the cranks and this extra bit is from somewhere else!. Either way, any help would be much appreciated.

    Cheers

    Tucky

  • Magnus

    Member
    25 October 2016 at 7:49 am
  • Tucky

    Member
    25 October 2016 at 5:05 pm

    Well I found out what the problem was. When I removed the drive side crank arm, the end of the crank puller became lodged into the bottom bracket! I have now pulled it out and fitted it back to the puller. The bottom bracket now looks as it should, so a new replacement is on its way. You live and learn as they say.

    Tucky

  • Magnus

    Member
    26 October 2016 at 7:57 am

    Well I found out what the problem was. When I removed the drive side crank arm, the end of the crank puller became lodged into the bottom bracket! I have now pulled it out and fitted it back to the puller. The bottom bracket now looks as it should, so a new replacement is on its way. You live and learn as they say.

    Tucky

    😆 😆 😆

Viewing 1 - 4 of 4 posts
Original Post
0 of 0 posts June 2018
Now

New Report

Close