Find answers, ask questions, and connect with others in our UK cycling & mountain bike forum.

  • carrera vanquish 07

     Aspock updated 11 years, 3 months ago 2 Members · 3 Posts
    This page may contain affiliate links which means that Cycling Addicts earns from qualifying purchases. See our full disclosure. This page may contain affiliate links.
  • Aspock

    Member
    6 October 2009 at 7:07 am

    Chaps,

    Does anyone have one of these

    http://www.thebikelist.co.uk/carrera/vanquish-medium-07-2007

    I am struggling with the mech hanger which is missing. Any pics would be useful. Also there is a cut out on the inside of the rear forks on the deraillieur side which when the wheel fits in means that no. 9 gear touches the frame which cant be right.

    So if anyone can help i need to know what the hanger looks like?

    is there a missing spacer? or does the hanger fit on the inside?

    Aidan

    Halfords have been a bit useless (surprise)

  • Gunner

    Member
    6 October 2009 at 1:59 pm

    Looks to me by the picture, that the hanger fits on the outside.

    I presume that the wheel wont turn then when seated in the rear stays at the moment. ❓

  • Aspock

    Member
    6 October 2009 at 7:28 pm

    Problem solved. It fitted on the inside.

    For reference if anyone is looking for a hanger for an 07 Carrera vanquish it is a BETD no 53.

    All up and running now. just popped down our hill and back and wow what a difference in climbing ability from the Anthem. Must get it on the scales.

    Well chuffed and all in it stands me at £205 for a carbon forked bike 8) 8)

    Just the high and low points to fine tune and ……………. well I can’t wait until Sunday morning.

    Aidan

Viewing 1 - 3 of 3 posts
Original Post
0 of 0 posts June 2018
Now

New Report

Close