Find answers, ask questions, and connect with others in our UK cycling & mountain bike forum.

  • Fitting new shifters

     Greg updated 12 years, 10 months ago 3 Members · 4 Posts
    This page may contain affiliate links which means that Cycling Addicts earns from qualifying purchases. See our full disclosure. This page may contain affiliate links.
  • Greg

    Member
    9 March 2008 at 5:31 pm

    Has anyone replaced shifters and are they easy to fit? I was out to day and the bottom half of my rhs shifter pod just fell out 😥 . I am running deore 9 speed and was just going to repalce with the same.

    Cheers

    Greg

  • Anonymous

    Member
    9 March 2008 at 6:06 pm

    Should be easy enough Greg if you’re replacing with the same type. Could be fiddly when it comes to the cables though. Just remember to re index your gears when done 😉

  • Gunner

    Member
    9 March 2008 at 6:33 pm

    Yes Greg, they’re pretty easy to fit, providing you allow yourself enough time. Indexing shouldn’t really be that much of a problem, and it’s a good oppurtunity to give your new cable a good oiling as you route it.

    if you’re unsure about anything, why not try loking at

    http://www.sheldonbrown.com

    for some advice. 😉

  • Greg

    Member
    9 March 2008 at 9:02 pm

    cheers chaps, nice 1

    Greg

Viewing 1 - 4 of 4 posts
Original Post
0 of 0 posts June 2018
Now

New Report

Close