Find answers, ask questions, and connect with others in our UK cycling & mountain bike forum.

  • FREE HUB REMOVAL

     gwjp updated 1 month, 2 weeks ago 3 Members · 3 Posts
    This page may contain affiliate links which means that Cycling Addicts earns from qualifying purchases. See our full disclosure. This page may contain affiliate links.
  • aaronr

    Member
    29 July 2020 at 12:45 pm

    Hello all,

    Trying to remove my free hub from my 27.5 wheel , bearings are full of gunk and i was looking to upgrade anyway, the set up i am going for now requires a micro spline , so this needs to come off.

    i have tried 10mm hex , its way too small , iv tried 7/16″ ( Cant get hold of an 11mm) from both the drive and no drive side and still no joy.

    it is tight !!!! any tips as to getting this SOB off its driving me crazy.

    thanks

    • This discussion was modified 3 months ago by  aaronr. Reason: adding pictures
  • quickwheels

    Member
    30 July 2020 at 5:13 pm

    You might find this video helpful: https://www.youtube.com/watch?v=DO71YcjSqWY

  • gwjp

    Member
    9 September 2020 at 1:37 pm

    not all wheels have removable freehubs

Viewing 1 - 3 of 3 posts
Original Post
0 of 0 posts June 2018
Now

New Report

Close