Find answers, ask questions, and connect with others in our UK cycling & mountain bike forum.

  • Tektro Help!!!

    This page may contain affiliate links which means that Cycling Addicts earns from qualifying purchases. See our full disclosure. This page may contain affiliate links.
  • bensalvage

    8 March 2021 at 10:43 pm

    I am hoping for some solid advice, I have a whyte 801 and have been trying to get my brakes sorted after mot using the bike for a while, they were squealing and had lost their bite, I’ve ordered new pads and fluid and have gone about bleeding, however firstly I have noticed that the pistons on the calipers don’t move equal amounts together, I am also looking for tips on how to get a good solid bleed before I reinstall the new pads as I really don’t want to contaminate them I have also cleaned the discs throughly with brake cleaner.

    Any advice and tips welcome


Viewing 1 of 1 posts
Original Post
0 of 0 posts June 2018

New Report